Convergent Design Odyssey 7 User Manual download pdf (Page 53)

Release Notes Odyssey7Q Firmware 1.11.100

NEW FEATURES (ALL MODES)

ZOOM MEMORY

When using Pixel Zoom, the screen coordinates in 1:1 and 2:1 zoom modes are remembered

from previous use. Drag with ﬁnger on OLED display to position zoom window. Window will

return to same position upon returning to Pixel Zoom setting. Reset zoom window to center by

tapping frame reference map in lower right corner. Coordinates retained until changing record

mode or powering down Odyssey7Q.

MULTI-STREAM

Multi-Stream interface updated with A/B/C/D input selector buttons. Multi-Stream initializes

in Quad Split view (display divided into four separate images). Tap A, B, C, or D buttons to

select a single input for full screen display. Inputs can be directly switched to by selecting the

corresponding button without need to scan through other inputs. To return to Quad Split view,

tap on the currently selected input to de-select it.

SONY FS700 RECORD OPTION

FS700 4K -> HD ProRes (4K2HD)

4K2HD in REC709 (800%)

Added support for REC709 (800%) gamma setting. On FS700, in Picture Proﬁle menu, select

a PP with Gamma set to ITU709(800%). This setting increases Dynamic Range in highlights by

three stops.

4K2HD LUTs

Added LUT function in 4K2HD mode. If S-LOG2 or REC709 (800%) is selected as camera

gamma, tapping LUT button applies a LUT to adjust viewed image to a standard REC709

without altering the recording. LUT is applied to the OLED display as well as SDI and HDMI

outputs.

FIXES & IMPROVEMENTS

ALL MODES

• Menu setting MENU » OUTPUTS » MONITORING changed to OVERLAYS to more accurately

reﬂect function. On/o setting enables/disables image analysis tools such as Waveform and

False Color to output over video signal to SDI and HDMI outputs.

• Waveform and Histogram markers remain available during recording

1 2 ... 48 49 50 51 52 53 54 55 56 57

No comments

Convergent Design Odyssey 7 User Manual Page 53